Introduction:
This guide is written for those who do need video security and can’t afford costly installation services, or if the CCTV installer is not available in your area – the later is more common than one could think. We will cover most common security equipment types, as it is virtually impossible to go over such a wide rang of different security cameras and recording/video processing equipment available on the market.
I assume anyone considering do-it-yourself CCTV installation has basic knowledge of wiring techniques and practices. I am not to be held responsible or liable for damages to the equipment due to mishandling or misuse. Remember; during the installation always pay attention to safety. Working at heights and using tools can be dangerous, please follow all safety practices. Lets jump right to it now.
Planning:
First step of any camera installation is to plan camera and monitoring equipment locations. When planning for camera locations please take in consideration light condition, never install cameras in low light room pointing straight into the sunny area it will add glare to the picture, even if your camera has back light compensation it will not be enough. Use infrared cameras for very dark conditions and/or B/W cameras with as low LUX number as possible. I am not going to discuss proper equipment selection, as this was subject of my last article.
Selecting the best possible camera locations is not easy, and will directly impact the camera views. Besides light conditions, the distance to the monitoring object is equally important. There are many different types and focal lengths of lenses; your selection will depend on light condition and distance from the camera to the monitoring object. In small rooms around 500sq. ft. cameras with standard 3.6mm https://clicdanstaville.fr/ lens should be OK. Keep in mind that most bullet and board type of cameras come with 3.6mm lens, the greater the distance to the monitoring object the longer focal length of the lens will be needed. There is no ease way of judging lens selection, you can eider guess or buy professional lens selector tool.. Alternatively you can start with your lens selection and if needed get longer or shorter focal length lens later. Other option as far as lens selection goes, is to use variable focus lens, which is very versatile approach and takes the guess out of the lens selection process. For those who do not know what variable focus lens is, it’s basically adjustable focal length lens that will allow to change the focal length within specified range, fore example: 2.6mm – 8mm or 5mm – 50mm.
To maximize cameras coverage and get the most out of the CCTV system for least amount of money minimize number of it by placing cameras in strategic places, unless complete area coverage is needed. Avoid overlapping camera views, do not install them with source of light directly in front of it and do not place infrared cameras pointing at each other to eliminate risk of overexposure. These are the most common mistakes that need to be avoided. After the initial camera locations are predetermined, lets look at cable placement. Make sure that it is actually possible and practical to run cable to each location, if running the cable to any camera location is for some reason impossible opt-out for alternate location.